| Customization: | Available |
|---|---|
| After-sales Service: | 24*7 Service |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
Features:
1. YT27 is suitable for drilling horizontal or tip tilted blast hole in solid hard rocks as well as vertical bolt holes on the roof. The diameter of blast holes is usually 34-42mm, and the effective depth of the hole can reach to 5 meters.
2. YT27 can be used with the air leg FT160A . It is also installed on drill rig or drill frame; meanwhile, we provide a transparent lubricator FY250 to observe the oil level and adjust the oil quantity in order to make sure a favorable lubrication.
3. The YT27 air leg rock drill has the features of strong function of blowing and cleaning the gun hole and high torque of turning to braze.
4. The YT27 air-legged rock drills are most suitable for rock drilling in large mines and roadway projects.
5. With air-water linkage, air-leg quick return, air pressure adjustment, and other mechanisms.
6. Control handles are concentrated around the handle, the mechanism is novel and easy to operate.
7. The sound-deadening cover can effectively reduce noise and change the direction of exhaust at will, improving the working conditions on-site.
Application areas:
Railway, tunnel, highway, metallurgy, coal mine, water conservancy and hydropower construction projects.
Technical Specification:
|
Tpye
|
Air Leg Rock Drill
|
||
|
Model
|
YT27
|
YT28 |
YT29A
|
|
Cylinder Diameter (mm)
|
80
|
80 |
82
|
|
Piston Strock (mm)
|
60
|
60 |
60
|
|
Air Consumption m³/min
|
4.8
|
5 |
3.9
|
|
Impacts Frequency (HZ)
|
36.7
|
37 |
37
|
|
Working Pressure Mpa(kg/cm²)
|
0.3-0.63
|
0.4-0.63 |
0.4-0.63
|
|
Air Pipe Inner Diameter (mm)
|
25
|
25 |
25
|
|
Water Inner Diameter (mm)
|
19
|
13 |
13
|
|
Length (mm)
|
668
|
661 |
659
|
|
Weight (kg)
|
27
|
26 |
26.5
|
|
Shank (mm)
|
22*108
|
22*108 |
22*108
|
|
Rock Drill Hole Dia (mm)
|
34-45
|
34-45 |
34-45
|
|
Rock Drill Hole Depth (M)
|
5
|
5 |
5
|
| Air-leg model | Weight (kg) | Length (mm) | Advance Length (mm) | Cylinder diameter (mm) |
| FT160BC | 16.9 | 1800 | 1365 | 65 |
| FT160A | 17 | 1668 | 1338 | 65 |
| FT140B | 15.6 | 1687 | 1250 | 60 |
YT27 Pneumatic Air Leg Rock Drills Before Use:
1,Check the integrity and rotation of all parts (including rock drill, bracket, or rock drill cart) before drilling, fill necessary lubricant, and check whether the wind and waterways are smooth and whether the connection joints are firm.
2,Knock on the roof near the working face, i.e. check whether there are live rocks and loose rocks on the roof and second gang near the working face, and make necessary treatment.
3, the working surface of the flat shell hole location, is to be pounded flat in advance before allowing rock drilling, to prevent slippage or shell hole displacement.
4. It is strictly forbidden to drill dry eyes, and we should insist on wet rock drilling, turn on the water first and then the wind when operating, and turn off the wind and then the water when stopping drilling. When opening the hole, run at low speed first, and then drill at full speed after drilling to a certain depth.
5,No gloves are allowed to be worn by the drillers when drilling.
6,When using the air leg to drill the hole, pay attention to the standing posture and position, never rely on the body to pressurize, let alone stand in front of the rock drill under the work brazing rod, to prevent injury from broken brazing.
7,If abnormal sound and abnormal water discharge are found in rock drilling, stop the machine for inspection and find out the reason and eliminate it before continuing to drill.
8,When withdrawing from the rock drill or replacing the brazing rod, the rock drill can run slowly and pay attention to the position of the rock drill braze.
Related Products
){kind=link}